Characteristics Of Plastic Sheet Production Line

Feb 08, 2024

Leave a message

1. Temperature control of 1°C can accurately control the plasticizing process and the thickness and flatness of the sheet.
2. The roller forming and pressing station can be horizontal or vertical, and can be lifted and lowered freely to provide more choices during the operation of thick and thin plates and improve the quality of the plate.
3. The plate thickness control uses screw adjustment and two-way adjustment of the hydraulic pressure wheel to accurately control the plate thickness.
4. The diameter of the pressing roller is 350mm and the dual-circuit cooling system cooperates with the mold temperature controller to accurately control the temperature of the pressing roller to make the sheet thickness uniform.
5. The slicer, plate length and quantity are accurate.
6. The winding table equipment adopts high-end torque motor and cooperates with four-axis automatic tension control. It can adjust the speed and winding tension at will to achieve the purpose of flattening the sheet. With the slitting equipment, the required product width can be freely set. , this machine is equipped with an active meter counter to set the product length.