Energy Saving Part Of Extruder Equipment

Feb 19, 2024

Leave a message

The energy saving of the extruder can be divided into two parts: one is the power part and the other is the heating part.
Energy saving in the power part: Frequency converters are mostly used. The energy saving method is to save the residual energy consumption of the motor. For example, the actual power of the motor is 50Hz, but you actually only need 30Hz in production, and the excess energy consumption is wasted. Wasted, the inverter changes the power output of the motor to achieve energy saving.
Energy saving in the heating part: Most of the energy saving in the heating part is the use of electromagnetic heaters. The energy saving rate is about 30% to 70% of that of the old-fashioned resistance coil.