Hey there! As a supplier of used plate extruder machines, I've seen my fair share of issues that these machines can run into. In this blog, I'm gonna break down some of the common problems you might encounter with used plate extruder machines.
1. Wear and Tear of Components
One of the most obvious problems with used plate extruder machines is the wear and tear of components. Over time, parts like screws, barrels, and dies are subject to constant friction and pressure. The screws, which are responsible for conveying and melting the plastic material, can get worn out. This can lead to reduced efficiency in material conveyance and melting. For example, if the screw flights are worn, the plastic might not be pushed forward as effectively, causing uneven melting and extrusion.
The barrels also face a similar issue. The inner lining of the barrel can get scratched or eroded due to the abrasive nature of the plastic materials. This can affect the heat transfer and the overall flow of the plastic inside the barrel. And when it comes to the dies, they can develop nicks and scratches on the surface, which will result in defects in the extruded plates, like uneven thickness or surface roughness.
2. Electrical and Control System Issues
The electrical and control systems of used plate extruder machines can be a real headache. These systems are crucial for regulating the temperature, speed, and pressure of the extrusion process. Over the years, the electrical wiring can become frayed or corroded, leading to short - circuits or intermittent power supply. This not only disrupts the normal operation of the machine but can also pose a safety hazard.
The control panels, which house the sensors and controllers, can also malfunction. Sensors might give inaccurate readings of temperature or pressure, causing the machine to operate at incorrect settings. For instance, if the temperature sensor inaccurately reports a lower temperature, the machine might overheat the plastic, which can degrade its quality and affect the final product.
3. Inconsistent Extrusion Quality
Many used plate extruder machines suffer from inconsistent extrusion quality. There are multiple reasons for this. As mentioned earlier, the wear and tear of components can play a big role. But there are also other factors. The plastic material itself can cause issues. If the machine has been used with different types of plastics without proper cleaning in between, there might be cross - contamination. This can result in variations in the physical and chemical properties of the extruded plates.
Another factor is the calibration of the machine. Over time, the settings of the machine can get off - balance. The speed of the screw, the temperature of the heating zones, and the pressure applied during extrusion all need to be precisely calibrated. If these settings are not correct, the thickness, width, and surface finish of the extruded plates can vary from one batch to another.
4. Heating and Cooling System Problems
The heating and cooling systems are vital for the proper functioning of a plate extruder machine. The heating system is responsible for melting the plastic, while the cooling system helps in solidifying the extruded plate. In used machines, the heating elements can burn out or lose their efficiency. This can lead to uneven melting of the plastic, resulting in poor - quality extrusions.
On the other hand, the cooling system can face issues like clogged pipes or malfunctioning fans. If the cooling is not done properly, the extruded plates might warp or develop internal stresses, which can affect their strength and durability. For example, if the cooling water flow is restricted, the plate might not cool evenly, causing it to bend or crack.
5. Noise and Vibration
Excessive noise and vibration are common problems in used plate extruder machines. This can be due to several reasons. Loose or worn - out parts can cause the machine to vibrate more than normal. For example, if the bearings in the screw drive are worn, they can cause the screw to wobble, resulting in increased vibration and noise.
Imbalanced rotating parts can also be a culprit. The screw and the motor shaft need to be properly balanced. If they are not, the machine will vibrate, which not only makes a lot of noise but can also cause further damage to other components over time.
Now, I know these problems might sound a bit scary, but don't worry! We, as a used plate extruder machine supplier, take great care in inspecting and refurbishing our machines. Before we put any machine up for sale, we thoroughly check all the components, replace the worn - out parts, and calibrate the machine to ensure optimal performance.


If you're in the market for a used plate extruder machine, we've got some great options for you. Check out our Used PET Plastic Extruder Production Line, Second Hand PP Sheet Machine, and Used Pipe Three Layer Coextrusion Extruder Line.
We understand that you might have concerns about the quality and performance of used machines. That's why we're here to answer all your questions and provide you with detailed information about each machine we offer. If you're interested in purchasing a used plate extruder machine, don't hesitate to reach out to us for a discussion. We're more than happy to help you find the right machine for your specific needs.
References
- Plastics Extrusion Technology Handbook, by John A. Brydson
- Extrusion of Plastics: Theory and Practice, by Christopher Rauwendaal





